Classification of rubber rollers and quality standards of products

The transmission rollers are divided into nylon, polyurethane, rubber rings, hard plastic pipe sleeves, fiberglass, and steel shaft connectors, which are determined according to the needs of rubber roller users. Drive roller. Various glass float glass lines input and output. Drive rollers, various flat tempering furnace drive rubber rollers, using rubber such as Ding Qing, Ding Ben, and chloroprene. The thickness of the adhesive surface is 3mm to 10mm, the diameter is 36mm to 80mm, and the elastic tensile force is 60T to 80T. Oil resistant, wear-resistant, and capable of withstanding high temperatures above 200 ℃ at the inlet. Available in colors such as bright red, light green, and green. Rubber rings are used for transmission rollers and sets. Colors include red, black, white, green, etc. The red rubber rollers used in the 1500, 1800, 2000, and 2200 hot press machines are mostly made of rubber such as nitrile, chloroprene, and polybutadiene according to national standards. Wear resistant, corrosion-resistant, and resistant to high temperatures above 150 ℃. The elastic tensile force is between 40T and 80T when the diameter is between 75mm and 150mm.
Quality scale of rubber roller products:
1. The runout of rubber rollers shall not exceed 0.05mm;
2. The adhesive surface is free of sand holes and impurities;
3. No detachment, fast detachment, or hardening;
4. The warranty period is one year, and free replacement is provided due to quality issues.
Rubber rollers have properties such as oil resistance, radiation resistance, and combustion resistance. In fact, the characteristics of different rubber rollers are determined according to the production process requirements of users, so the characteristics of rubber roller products need to be constantly developed and created to meet the growing production needs of users.